Firewall (Water Based)
Unprotected walls / concrete can reach temperatures of 550°C in a fire, where collapse. Basic safety dictates fire protection to upgrade the fire resistance of buildings.
Additional Product Information:
Application viscosity: Thixotropic / Ready to Use
Mix Ratio: Not applicable
Typical Film Thickness: 85 to 120 microns dry (single coat)
Required film thickness depends on fire ratings
Theoretical Coverage: 11(m2/lt) at 90 microns DFT.
Method of Application: Airless Spray, Brush, Roller.
Drying Information: Ambient Temperature (25°C)
Touch Dry: 2 Hours
Hard Dry: 4-5 Hours(Recoating Interval: Min. 5 hours)
Viscosity: 95 - 115
Approx. Weights: 1.4 ± .4kg. per ltr. (after mixing of water)
Shelf Life: 12 months from date of packing
|Fire Rating||Average Dry Thickness (Firewall)|
|30 min||250 microns|
|60 min||350-450 microns;|
|120 min||550-700 microns|
In continuously improving technology there has been a swing towards the use of thin film intumescent coatings to achieve same traditional results.
Comes in semi liquid status and will give you 35Litres of ‘ready to use’ paint after mixing of 16 Litres of water.
- Check more details of Firewall (Wood)
- Check more details of Firewall (Cable)
- Check more details of Firewall (MS – Mild Steel)
- Check more details of Firewall (Paint Additive)
- Check more details of Firewall (Water Based)